CYS 17g Digital Plastic Gear Servo

SPECS:
17g Plastic Gear Digital Servo
Size: 37.6*13.3*33.8mm
Weight: 20(+/-1)g (0.71 oz)
Operating Voltage: 4.8-6.0V
Control System Required Pulse: (+)Pulse Width Control 1500usec Neutral
Operating Temperature Range: -10 to +50 Celcius degree
Operating Speed at no load:
(4.8V) 0.13sec/60 degree
(6.0V) 0.09sec/60 degree
Stall Torque:
(4.8V) 2.5kg.cm
(6.0V) 3.0kg.cm
Operating Angle: 45deg.one side pulse traveling 500 usec
360 Modifiable: No
Direction: Anticlockwise/Pulse Traveling 1000-2000usec
Current Drain:
(4.8V idle /no-load) 20mA/80mA
(6.0V idle /no-load) 20mA/80mA
Stall Current: 1.2A/1.5A
Dead Band Width: 3usec
Motor Type: Iron core
Bearing Type: None
Horn gear spline: 25T
Gear Type: Plastic
JR plug wire length: 180mm
Wire info:
Brown/Black = Negative
Red = Positive
Orange/White = Signal
IMPORTANT NOTES:
JR plug and 18cm connector wire.
Refer to the figure when installing the servo accessories.
For engine powered airplanes and boats, rubber must be used to reduce vibration.
Please choose correct model for your application.
Torque over-loaded will damage the servo’s mechanism.
Keep the servo clean and away from dust, corrosive gas and humid air.