- Channels: 6 PWM output channels
- Protocol: 2.4 GHz AFHDS (Automatic Frequency Hopping Digital System)
- Power Input: 4.0V – 6.5V DC
- Range: Approximately 500 – 1,000 meters in the air
- Dimensions: 45 × 23 × 13 mm
- Weight: ~13 g
- Antenna: Single antenna design
- Compatibility: Works with FlySky transmitters such as the FS-T4B, FS-CT6B, FS-T6, and FS-i6 (in AFHDS mode).
- Connect the Bind Plug: Insert the included bind plug (jumper) into the BAT (battery) port on the receiver.
- Connect Power / ESC: Plug your Electronic Speed Controller (ESC) or power source into one of the channel ports (such as CH3 for throttle), making sure the negative/black wire faces the correct outer edge.
- Power the Receiver: Plug in the battery to power the receiver; the red LED will begin flashing to indicate it is in bind mode.
- Power the Transmitter: Press and hold the Bind Key on your transmitter while turning on its power switch.
- Confirm Binding: Wait until the receiver’s red LED turns solid (non-flashing), indicating a successful link.
- Disconnect: Turn off the transmitter, unplug the receiver’s battery, and remove the bind plug from the BAT port


Reviews
There are no reviews yet.