Sweep buggy 1/16

This Kit is ready to run and includes 1 x 7.4V, 18650-1500mAh Li-ion battery (T plug), discharge rate 15C
SPECS:
– Material: Hardware; Electronics; Plastic
– 1/16 Electric four-wheel drive coupe: brushless motor
– 2840 brushless motor (4000 KV value)
– ESC/Receiver: 35A ESC/Receiver integrated control (splash-proof)
– Body battery: 7.4V 1500mAH 15C Li-ion battery (T plug)
– Servo: Three-wire 17G digital servo
– Remote control battery: 3 “AA” (not included)
– Charger: USB Balance Charger
– Frequency: 2.4GHz (support multiple cars to compete in the same field)
– Remote control distance: ?120 meters
– Remote control category: full scale synchronous control system (gun control)
– Handling time: 15-18 minutes (continuous running at full speed)
Charging time: 3-3.5 hours (USB balance charger)
Wheelbase: 185mm;
Wheel base: 188mm;
Wheel diameter: 85mm;
Speed; 70 km/h (top speed)
Protection functions:
1. Charging;
2. Stuck;
3. High temperature;
4. Low voltage
IMPORTANT:
1: Charging protection: constant current and constant voltage balance charging, protection function for battery overcharge and overcurrent.
2: Motor anti-jamming protection: when overloaded, the motor stops working.
3: High temperature protection: When the working temperature is higher than the set condition, the drive control circuit stops working, and resumes work when the temperature drops to a safe value.
4: ESC low-voltage power-off function, when the battery is lower than about 6.3-6.4V, it will automatically power off to prevent the battery from being damaged by over-discharge.
FEATURES:
Has the control feeling of a real car, and realizes full-scale continuously variable speed change, high-speed driving, rapid acceleration, deceleration, braking, reversing, left turn, right turn;
– Applicable site: flat, sand, mud, grass.
– Four-wheel drive: front and rear upright spring shock absorption, double wishbone independent suspension system;
– 2.4G full-scale synchronous remote control system. Full-scale throttle/steering;
– Metal differential, metal differential cup, powder planetary gear, powder driving gear, powder main gear;
– Metal CVD front drive shaft, metal rear dog bone, metal wheel cup;
– Three-wire 17G digital servo;
– 7.4V, 18650-1500mAh Li-ion battery (T plug), discharge rate 15C;
– New remote control panel function: rudder size adjustment;
– The whole vehicle adopts 16 ball bearings;
– Metal second floor, metal front and rear arm yards, metal middle drive shaft;
– The car shell adopts high toughness explosion-proof PVC car shell;
– Equipped with LED headlights; (three modes: always on, slow flash, fast flash);
– Equipped with head-up wheel;
– Simulation of big feet tires, strong grip;
INCLUDED:
1 x 1/16 Scale Monster RC truck
1 x 7.4V 1500mAH 15C Li-ion battery (T plug)
1 x 2.4G Remote Controller
1 x USB Balance Charger
1 x Rear wing
1 x Wheelie bar
1 x Hex Spanner
1 x Instruction manual